APPLICATIONS

	Used to connect the micro-tube with or without emitters in different irrigation configurations in landscape, nurseries, greenhouses and hanging pots or plantations.
	MICRO-TUBE
	Used to connect lateral PE tubes, on-line emitters, distributors and stakes. Used as a long path emitter which delivers different flows at the same pressure according to tube length. Diameter of 5.5 - 6.0 / 3.8 - 4.5 mm (OD / ID). Tube is produced using a mix of LDPE & LLDPE extrusion grade material. Packing: Available in Reels of 500 & 1000 meters.
	ADAPTERS & DISTRIBUTORS
	Used to connect Micro-Tube to emitter barbed inlet or barbed outlets. Distributor adapters are used to distribute the emitter flow into 2 or 4 locations, giving lower & equal flow discharge at each outlet. Manufactured from high quality PP with UV stabilized material for long life.
	Distributor with 4 outlets 4 outlets to be connected with the Micro-Tube 3.8 - 4.5 mm (ID). The base can be connected to the emitter directly or to the lateral through an adapter. 5 mm female inlet. Easily mounted on the EDEN PC No Drain Emitter which has a 5.3 mm male outlet. Distributes emitter flow from 4 outlets.
	Distributor with 2 outlets 2 outlets to be connected with the Micro-Tube 3.8 - 4.5 mm (ID). The base can be connected to the emitter directly or to the lateral through an adapter. 5 mm female inlet. Easily mounted on the EDEN PC No Drain Emitter which has a 5.3 mm male outlet. Distributes emitter flow from 2 outlets.
	Adapter for Micro-Tube / Distributor To be connected with the Micro-Tube 3.8-4.5 mm (ID) and distributors. Easily connected to distributors with 2 & 4 outlets.

PACKING

	MFDS004	MFDS002	MFAD504
Pcs / Small Bag	1,500	2,000	4,000
Pcs / Carton	15,000	28,000	64,000

STAKES

Stake with Labyrinth - MFSKL03

• Can be used as a low flow emitter with a flow rate of 2.8 l/h @ 1 bar.
• Used as an accessory for the On-line Emitter connected with 2 or 4 outlet distributor in order to control the water distribution when the emitters are placed on different levels.
• To be connected with Micro-Tube 3.8 mm (ID).

Pressure (Bar)	0.5	1.0	1.5	2.0	2.5
Mean Flow (lph)	1.8	2.8	3.6	4.2	4.7
* Recommended Operating Pressure @ 1 Bar

                                                            MFSKB01,MFSKR02,MFSKL03

Clip Stake - MFSKR02

• Used to hold Micro-Tube with an emitter at its end for better placement of emitter and water
  distribution.
• To be connected with Micro-Tube of maximum 5.3 mm (OD).
  

Drop Leading Stake - MFSKB01

• To be connected with Micro-Tube of Diameter of 3.8 - 4.5 mm (ID) with barbed head.
  Applied as a drop leading stake.

PACKING

	MFSKL03	MFSKR02	MFSKB01
Pcs / Small Bag	200	250	250
Pcs / Carton	2,400	3,000	3,000