Adriline  
  ADRIPC  
  Miniline  
  Adrilite  
  Adritape  
  Miniline 16

APPLICATIONS

  • Used for irrigating row crops, fresh vegetables, potatoes, vineyards, orchards and
    greenhouse applications.
  • Ideal for long irrigation laterals particularly in cotton, banana and sugar cane
    plantations.

MAIN FEATURES

  • Contains a small turbulent flow emitter inseparably welded to the inside wall of the
    tube at different spacing.
  • Its labyrinth type emitter features a self-cleaning built in strainer at its inlet.
  • Its joint-less design guarantees longer lateral lengths and uniform emission.
  • Easy mechanical installation and recovery irregardless of crop density.
  • Multi-outlet emitter giving a closer and more uniform water distribution.
  • Easily buried underground when produced with a special root repellent material that protects it from the clogging typically caused by roots.
  • A minimum service life of five years.
  • Easy roll-up, storage and re-use season after season.
  • The small size emitter and low pipe thickness, main features of the Miniline, allow for lesser friction loss in the pipe therefore longer lateral lines when compared to the standard product.

TECHNICAL FEATURES

  • Miniline is produced with a 16 mm (OD) and wall thickness of 0.9 mm.
  • Three nominal discharge rates are available in 1.6 LPH, 4.4LPH and 10.2 LPH at 1 bar.
  • Emitter spacing starts from 20cm up to 125cm at any interval.
  • The pipe is produced using a mix of an LDPE and LLDPE extrusion grade material.
  • The emitter is produced using an LLDPE injection grade.
  • Recommended filtration is 120 mesh using screen or disc filter.

PACKING

400 mt Coil 20 Ft. Container 40 Ft. Container
Miniline 16 mm 160 Coil 360 Coil

 

MINILINE 16 HYDRAULIC DATA

Pressure
(Bar)
Mean Flow Rate (lph)
ML 16/01 ML 16/04 ML 16/10
0.8 1.35 3.80 9.45
1.0 1.60 4.40 10.20
1.5 2.00 5.50 12.90
2.0 2.30 6.40 15.20
2.5 2.60 7.10 17.11

* Recommended Operating Pressure @ 1.0 Bar

Page 11 P-1.jpg

Page 11 P-2.jpg

 


                    Maximum Lateral Running Length (mts)

Dripper Spacing
(cms)
20 25 30 40 50 60 75 90 100 150 200
ML 16/01
1% (Down Hill) 85 113 130 163 194 224 268 312 340 348 348
0% 85 98 111 134 155 174 202 227 243 317 382
1% (Up Hill) 73 82 90 104 116 126 138 147 153 173 184
ML 16/04
1% (Down Hill) 35 39 45 55 64 73 86 99 107 145 182
0% 33 38 43 52 60 67 77 87 93 121 146
1% (Up Hill) 31 35 39 46 53 59 67 74 78 98 112
ML 16/10
1% (Down Hill) 20 22 25 31 36 41 48 54 58 78 97
0% 19 22 25 30 35 39 45 51 54 71 85
1% (Up Hill) 19 21 23 28 32 36 41 46 49 62 73
* Operating pressure 1.0 bar, Flow Variation 10%
Page-11_03.gif


  Miniline 20

APPLICATIONS

  • Used for irrigating row crops, fresh vegetables, potatoes, vineyards, orchards and
    greenhouse applications.
  • Ideal for long irrigation laterals particularly in cotton, banana and sugar cane
    plantations.

MAIN FEATURES

  • Contains a small turbulent flow emitter inseparably welded to the inside wall of the
    tube at different spacing.
  • Its labyrinth type emitter features a self-cleaning built in strainer at its inlet.
  • Its joint-less design guarantees longer lateral lengths and uniform emission.
  • Easy mechanical installation and recovery irregardless of crop density.
  • Multi-outlet emitter giving a closer and more uniform water distribution.
  • Easily buried underground when produced with a special root repellent material that
    protects it from the clogging typically caused by roots.
  • A minimum service life of five years.
  • Easy roll-up, storage and re-use season after season.
  • The small size emitter and low pipe thickness, main features of the Miniline, allow for
    lesser friction loss in the pipe therefore longer lateral lines when compared to the
    standard product.

TECHNICAL FEATURES

  • Miniline is produced with a 20 mm diameter at a thickness of 0.85 mm. Two nominal
    discharge rates are available in 1.9 and 3.2 LPH.
  • Emitter spacing starts from 20cm up to 125cm at any interval.
  • The pipe is produced using a mix of an LDPE and LLDPE extrusion grade material.
  • The emitter is produced using an LLDPE injection grade.
  • Recommended filtration is 120 mesh using screen or disc filter.

PACKING

400 mt Coil 20 Ft. Container 40 Ft. Container
Miniline 20 mm 105 Coil 230 Coil

 

MINILINE 20 HYDRAULIC DATA

Pressure
(Bar)
Mean Flow Rate (lph)
ML 20/02 ML 20/03
0.8 1.70 2.90
1.0 1.90 3.20
1.5 2.50 4.22
2.0 2.86 4.97
2.5 3.30 5.60
* Recommended Operating Pressure @ 1.0 Bar

Page 13 P-1.jpg

 

Maximum Lateral Running Length (mts)

Dripper Spacing
(cms)
20 25 30 40 50 60 75 90 100 150 200
ML 20/02
1% (Down Hill) 96 130 150 188 225 261 314 348 348 466 467
0% 96 111 125 151 175 197 228 257 275 359 432
1% (Up Hill) 81 90 99 114 126 136 148 157 162 181 171
ML 20/03
1% (Down Hill) 76 88 101 126 150 172 206 238 259 348 463
% 68 79 89 108 125 141 163 183 196 255 308
1% (Up Hill) 61 68 75 88 99 108 120 130 135 157 171
* Operating pressure 1.0 bar, Flow Variation 10%
Page-13_03.jpg


Website designed & copyright photos by Batelco Jordan